What evidence should be agreed before acceptance testing for robotic sprue removal?
Agree acceptance around the retained moulding, the separated material and readiness for the next cycle. Define the permitted remaining gate, marks and distortion using approved references, and record the cavity, material condition, support and tool setup examined.
A detached runner alone does not demonstrate an acceptable part or controlled waste handling. Link each result to the sprue-removal requirements, with assessed exceptions, review responsibilities and conditions not yet demonstrated.
Plan robotic sprue removal around your parts, process, cycle time, tooling, recovery and acceptance criteria. Discuss the highest-risk feasibility questions with Oxford Industrial Automation. Use this guide to resolve run-off criteria and production evidence before it limits the final system.
Discuss your application
Record the sample origin, cavity or variant, material condition and whether removal occurs on freshly moulded or cooled parts. Keep the support and tool setup, observed finish after release, waste result and reviewer with each recorded condition.
Cover the agreed cavity range, difficult gate access, normal location variation and production pattern. State which incomplete-cut, retained-fragment, waste-collection and interrupted-operation cases are included in the assessed plan and which remain unexamined.
Judge separation, the retained component and the waste route together. Agree the required checks for gate finish, marks and distortion, including those repeated after tool replacement or adjustment, and record uncertain outcomes separately from accepted results.
For Robotic Sprue Removal Run-off and ramp-up checklist, describe the current position, required outcome, acceptable limits and known exceptions for part, product and process variation for robotic sprue removal & handling. That lets us compare options against your real production rather than one nominal value.
For Robotic Sprue Removal Run-off and ramp-up checklist, describe the current position, required outcome, acceptable limits and known exceptions for arrival pattern and presentation. That lets us compare options against your real production rather than one nominal value.
For Robotic Sprue Removal Run-off and ramp-up checklist, describe the current position, required outcome, acceptable limits and known exceptions for required cycle and production pattern. That lets us compare options against your real production rather than one nominal value.
For Robotic Sprue Removal Run-off and ramp-up checklist, describe the current position, required outcome, acceptable limits and known exceptions for tooling, sensing and process interfaces. That lets us compare options against your real production rather than one nominal value.
For Robotic Sprue Removal Run-off and ramp-up checklist, describe the current position, required outcome, acceptable limits and known exceptions for operator access, recovery and changeover. That lets us compare options against your real production rather than one nominal value.
For Robotic Sprue Removal Run-off and ramp-up checklist, describe the current position, required outcome, acceptable limits and known exceptions for run-off criteria and production evidence. That lets us compare options against your real production rather than one nominal value.